Search for Products
Categories
Brands
Let’s have a look at Our Portfolio
Product Summary
17m JLG X17J / X17J+ Compact Crawler Articulating Boom Lift
Description
The JLG X17J / X17J Plus is a compact, tracked (crawler) articulating boom lift built for navigating tight access zones, slopes, and difficult terrain. Its hybrid (electric/diesel) propulsion and narrow footprint make it suitable for indoor/outdoor use, with superior maneuverability and reliability in both exposed and sensitive environments.
Key Specifications
Working Height: ~ 16.96 m
Platform Height: ~ 14.96 m
Horizontal Reach: ~ 7.65 m
Up-and-Over Clearance: ~ 7.80 m
Platform Capacity (Unrestricted): 230 kg
Platform Size: 0.69 m × 1.34 m
Stowed Width (with platform): ~ 1.48 m
Machine Weight: ~ 2,230 kg
Gradeability: ~ 28 %
Maximum Operating Slope: ~ 16°
Maximum Approach / Depart Angles: ~ 20°
Rotation / Swing: 360° non-continuous turntable
Jib Length / Articulation: ~ 1.68 m, ±89° articulation
Width of Undercarriage (Retracted / Extended): ~ 0.79 m / 1.09 m
Drive / Power Options: Electric motor option, petrol or diesel engine option (varies by model)
Other Features:
• Auto-levelling outriggers
• Proportional hydraulic controls
• Slide bar rear entry
• Forklift pockets
• Powered track extension / retraction
• SkyGuard-control protection
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance schedule
Fully inspected, tested, and certified before hire
Supported by Dayim’s 24/7 technical, logistics, and service teams
Offered under short-term, long-term, and project-based contracts
Applications
Facade, cladding, and structural access in narrow zones
Industrial, plant, and utility maintenance
Indoor-outdoor hybrid sites requiring compact tracking
Slope or uneven terrain sites
Power, telecom, and tower servicing
Event rigging and elevated installation tasks
Product Summary
1800 cfm 12 bar Atlas Copco XAS 1800 Diesel Portable Air Compressor
Atlas Copco XAVS 1800 Diesel Portable Air Compressor
Description
The Atlas Copco XAVS 1800 is a compact but high-capacity portable compressor suited for heavy-duty and industrial applications. It features a robust screw compressor design, efficient cooling, and a rugged frame. The model emphasizes versatility, reliability, and easier maintenance in field environments.
Key Specifications
Nominal Working Pressure: 10 bar (≈ 145 psi)
Unloading Pressure: Up to 14 bar (≈ 203 psi)
Engine: 6-cylinder diesel (C15 series)
Fuel Tank Capacity: Large capacity for extended operation
Weight (ready to use): ~ 1,600 – 1,700 kg
Noise Level: ~ 72 dB(A) at 7 m
Cooling System: Liquid-cooled with aftercooler
Oil System: Integrated compressed-air oil separator
Control System: Electronic controller with diagnostics and engine regulation
Construction: Sound-attenuated housing, forklift pockets, trailer tow frame
Availability & Readiness
Units ready for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Fully inspected, tested, and certified before dispatch
Supported 24/7 by Dayim’s technical, service, and logistics teams
Offered under short-term, long-term, or project-based rental contracts
Applications
Major construction and infrastructure sites
Sandblasting, drilling, and pneumatic tool operations
Industrial maintenance and heavy fabrication sites
Pipeline and utility worksites
Mixed-pressure sites requiring flexibility in airflow and delivery
Product Summary
1800 cfm 15 bar Atlas Copco XAVS 1800 CD Diesel Portable Air Compressor
Description
The Atlas Copco XAVS 1800 CD is a powerful, compact diesel portable air compressor designed for demanding industrial and site operations. Its single-stage screw design, advanced control system, and robust build make it ideal for applications requiring continuous airflow under varying pressure demands.
Key Specifications
Working Pressure: ~ 10.3 bar (≈ 145 psi) (typical for its class)
Free Air Delivery: ~ 1,712 cfm (≈ 48.5 m³/min) at 10.3 bar pressure
Engine: Caterpillar, 6-cylinder, liquid-cooled diesel
Construction: Silenced, sound-attenuated enclosure
Cooling / Oil System: Integrated air/oil separator, cooling circuit
Control System: Intelligent controller with diagnostics and regulation
Weight / Dimensions: Substantial, trailer-mounted or skid configuration
Features:
• Variable flow and pressure adaptability
• Durable frame and service access doors
• Fuel-efficient operation with optimized engine control
• Central drains, corrosion protection, and transport-ready chassis
Availability & Readiness
Units ready for rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Inspected, tested, and certified prior to dispatch
Supported by Dayim’s 24/7 technical, service, and logistics teams
Offered under short-term, long-term, or project-based rental contracts
Applications
Heavy industrial and construction air supply
Sandblasting, drilling, and high-demand pneumatic tools
Plant maintenance and support operations
Infrastructure, pipeline, and utility works
Projects requiring stable, large-volume compressed air
Product Summary
185 cfm 7 bar Atlas Copco XAS 97 DD Diesel Portable Air Compressor
Description
The Atlas Copco XAS 97 DD is a reliable and efficient portable air compressor built for demanding construction and industrial applications. Powered by a fuel-efficient Deutz diesel engine, it delivers a steady supply of compressed air for pneumatic tools, sandblasting, and general site operations. Its compact design, low noise, and durable canopy make it ideal for heavy-duty outdoor use.
Key Specifications
Free Air Delivery: 5.3 m³/min (≈ 189 cfm)
Maximum Working Pressure: 7 bar (≈ 102 psi)
Engine: Deutz D2011L03, 3-cylinder diesel
Engine Power: 36 kW
Fuel Tank Capacity: 80 L
Compressor Oil Capacity: 8 L
Operating Weight: 890 kg (fixed towbar)
Dimensions (L × W × H): 2,915 × 1,417 × 1,360 mm
Noise Level @ 7 m: 72 dB(A)
Air Receiver Volume: 16.7 L
Oil Content in Air: < 5 mg/m³
Design Features:
• HardHat® impact-resistant polyethylene canopy
• Zincor™ steel powder-coated frame for corrosion resistance
• Stepless automatic speed control for fuel efficiency
• Easy service access with wide-opening panels
• Road-tow chassis for quick mobility
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Fully inspected, tested, and certified before deployment
Supported by Dayim’s 24/7 technical, service, and logistics teams
Offered for short-term, long-term, and project-based rental contracts
Applications
Construction and infrastructure projects
Pneumatic tool operation (breakers, drills, chippers)
Sandblasting and surface preparation
Industrial maintenance and painting
Pipeline testing and utility works
Product Summary
18m Genie GS-5390 RT Rough Terrain Scissor Lift
Description
The Genie GS-5390 RT is a powerful rough-terrain diesel scissor lift designed for exceptional lifting capacity and stability on demanding job sites. Built for outdoor use, it offers outstanding performance on uneven surfaces with 4WD traction, hydraulic outriggers, and a large working platform—ideal for construction, cladding, and maintenance at height.
Key Specifications
Working Height: 18.15 m (59 ft 6 in)
Platform Height: 16.15 m (53 ft)
Platform Capacity: 680 kg (1,500 lbs)
Platform Size (Extended): 7.38 m × 1.83 m (24 ft 3 in × 6 ft)
Lift Time (Up/Down): 50 s / 43 s
Gradeability: 40 %
Drive Speed (Stowed): 8 km/h (5 mph)
Drive Speed (Raised): 0.8 km/h (0.5 mph)
Machine Weight: 7,553 kg (≈ 16,655 lbs)
Fuel Tank Capacity: 75 L (19.8 gal)
Power Source: Diesel engine – Kubota V2403
Hydraulic System Capacity: 100 L (26 gal)
Outrigger Leveling Capability: 12° front to rear / 10° side to side
Stowed Dimensions:
• Length: 4.88 m (16 ft)
• Width: 2.29 m (7 ft 6 in)
• Height (Rails Folded): 2.03 m (6 ft 8 in)
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Inspected, tested, and certified prior to deployment
Fully supported by Dayim’s 24/7 logistics, service, and technical teams
Offered for short-term, long-term, and project-based rental contracts
Applications
Construction and structural works
Façade, glazing, and cladding installation
Industrial plant maintenance
Oil & Gas and power facility operations
Event setup and outdoor infrastructure access
High-elevation electrical and mechanical works
Product Summary
18m JLG 530LRT Rough Terrain Scissor Lift
Description
The JLG 530LRT is a diesel-powered rough-terrain scissor lift engineered for outstanding performance on uneven outdoor job sites. Combining high platform capacity, four-wheel drive, and exceptional gradeability, it delivers safe and efficient elevation for multiple operators and heavy tools—making it ideal for demanding construction and industrial applications.
Key Specifications
Working Height: 18.15 m (59 ft 6 in)
Platform Height: 16.15 m (53 ft)
Platform Capacity: 680 kg (1,500 lbs)
Platform Size (Extended): 7.38 m × 1.83 m (24 ft 3 in × 6 ft)
Extension Deck Length: 1.22 m (4 ft) each side
Drive Speed (Stowed): 6.4 km/h (4.0 mph)
Drive Speed (Raised): 0.8 km/h (0.5 mph)
Gradeability: 45 %
Power Source: Diesel engine – Kubota V2403
Fuel Tank Capacity: 75 L (19.8 gal)
Hydraulic System Capacity: 100 L (26.4 gal)
Machine Weight: 7,302 kg (≈ 16,100 lbs)
Outrigger Leveling Capability: 12° front-to-rear / 10° side-to-side
Stowed Dimensions:
• Length: 4.88 m (16 ft)
• Width: 2.29 m (7 ft 6 in)
• Height (Rails Folded): 2.03 m (6 ft 8 in)
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Inspected, tested, and certified prior to deployment
Supported by Dayim’s 24/7 logistics, service, and technical teams
Available for short-term, long-term, and project-based rental contracts
Applications
Structural and construction work at height
Façade and glazing installation
Industrial facility maintenance
Oil & Gas and power generation plants
Large-scale event or stadium setups
Electrical and mechanical works on elevated sites
Product Summary
18m JLG E600J Electric / Hybrid Boom Lift
Description
The JLG E600J is a high-reach electric / hybrid boom lift engineered for low-emission, low-noise operation while maintaining full reach and performance. It combines excellent vertical access with smart drive and steering systems to perform equally well indoors and on moderate outdoor terrain.
Key Specifications
Working Height: 18.36 m (≈ 60 ft 3 in)
Horizontal Reach: 13.18 m (≈ 43 ft 3 in)
Platform Capacity: 227 kg (500 lb)
Swing Range: ~ 400° non-continuous
Rotation: 180° hydraulic platform rotator
Weight (Typical): 6,894 kg (≈ 15,200 lb)
Gradeability: 2WD: 30 %, 4WD: 45 %
Drive Speed (Stowed): 4.83 km/h
Axle Oscillation: 0.20 m (8 in)
Ground Clearance: ~ 0.30 m
Enclosure & Features:
• Oscillating front axle
• Automatic traction control (ATC)
• QuikCharge GenSet option
• 48 V DC electrical system with deep-cycle batteries
• Foam-filled / non-marking tires
• Compact frame for indoor-to-outdoor transitions
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Thoroughly inspected, tested, and certified before each dispatch
Supported by Dayim’s 24/7 service, logistics, and technical teams
Offered under short-term, long-term, or project-based rental contracts
Applications
Indoor industrial, warehouse & clean facility work
Exterior façade, cladding, and maintenance operations
Environments requiring quiet and low-emission access
Telecom, utility, and power plant servicing
Sports, exhibition, stadium, and event installations
Areas where indoor/outdoor flexibility is needed
Product Summary
2 ton Manitou ME 420 Electric Forklift
Description
The Manitou ME 420 is a compact, electric counterbalance forklift ideal for warehouse, industrial, and logistics applications. With its silent electric drive, compact footprint, and robust build, it offers efficiency, reliability, and low operating costs—perfect for interior and exterior use where emissions or noise are concerns.
Key Specifications
Rated Capacity: 2,000 kg (≈ 4,409 lb)
Load Center: 500 mm
Service Weight: 4,000 kg
Wheelbase: 1,485 mm
Overall Width: 1,265 mm
Height to Overhead Guard: 2,155 mm
Length to Fork Face: 2,342 mm
Ground Clearance (Mast): 112 mm
Turning Radius (Outside): 2,090 mm
Travel Speed (Laden / Unladen): 14 / 14 km/h
Lifting Speed (Laden / Unladen): 0.28 / 0.40 m/s
Lowering Speed (Laden / Unladen): 0.42 / 0.29 m/s
Drive Motor Power (S2 60 min): 11 kW
Lift Motor Power (Duty Cycle): 8.6 kW
Battery: 48 V / 700 Ah
Hydraulic System Pressure: 175 bar
Hydraulic Flow for Attachments: 35 L/min
Sound Level at Operator Ear: < 71 dB(A)
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained via Dayim’s preventive maintenance program
Inspected, tested, and certified before dispatch
Supported 24/7 by Dayim’s technical, service, and logistics teams
Offered for short-term, long-term, and project-based contracts
Applications
Indoor warehouse operations and rack handling
Loading/unloading goods in factories and distribution centers
Electric, low-noise operations in clean or semi-clean facilities
Logistics, shipping, and cross-dock yards
Container handling with compact forklift clearance
Product Summary
200kVA Atlas Copco QAS200 Diesel Generator
Description
The Atlas Copco QAS200 is a powerful and reliable diesel generator designed for continuous performance in rental, industrial, and infrastructure applications. With its multi-voltage flexibility, rugged canopy, and advanced fuel management system, it ensures consistent, safe, and efficient power delivery even in the most demanding environments.
Key Specifications
Prime Power (PRP): 200 kVA (160 kW)
Standby Power (ESP): 220 kVA (176 kW)
Voltage / Phase Options: Multi-voltage, 3-phase (400 V, 480 V, 240 V, 208 V selectable)
Power Factor: 0.8
Engine: John Deere 6068HFG05, turbocharged and aftercooled
Speed / Frequency: 1,800 rpm / 60 Hz (50 Hz variant available)
Fuel Tank Capacity: 1,268 L
Fuel Consumption (100 % Load): ~ 41 L/h
Sound Level (75 % Load, 7 m): ~ 70 dB(A)
Alternator: Leroy Somer LSA 44.3 VL 13, 4-pole, 12-wire
Cooling: Water-cooled system
Dimensions (L × W × H): ~ 3.38 m × 1.18 m × 1.66 m
Machine Weight (Wet): ~ 3,120 kg
Enclosure & Features:
• Sound-attenuated, corrosion-resistant steel canopy
• 110 % fluid-containment base
• Forklift pockets and lifting points
• Easy single-side service access
• Optional trailer mount and parallel connection capability
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Inspected, tested, and certified prior to dispatch
Fully supported by Dayim’s 24/7 logistics, service, and technical teams
Offered for short-term, long-term, or project-based rental contracts
Applications
Construction and infrastructure site power
Industrial and plant backup supply
Events, stadiums, and outdoor installations
Remote or off-grid power generation
Parallel power configurations for scalable demand
Product Summary
200kVA FG Wilson P200-3 Diesel Generator
Description
The FG Wilson P200-3 is a high-performance diesel generator built for reliability in demanding rental, construction, and industrial power applications. With strong prime and standby ratings, a robust enclosure, and efficient engine design, it ensures dependable power delivery across diverse site conditions.
Key Specifications
Prime Power (50 Hz): 180 kVA (144 kW)
Standby Power (50 Hz): 200 kVA (160 kW)
Prime Power (60 Hz): 200 kVA (160 kW)
Standby Power (60 Hz): 218.8 kVA (175 kW)
Voltage / Phase: 110–480 V, 3-phase
Engine: Perkins 1106A-70TAG3, turbocharged, intercooled
Speed / Frequency: 1,500 or 1,800 rpm
Fuel Tank Capacity: 394 L
Fuel Consumption (100% Prime): 39.8 L/h
Dimensions (Open Set): ~ 2,510 mm × 1,010 mm × 1,640 mm
Weight (Dry): ~ 1,521 kg
Weight (Wet): ~ 1,548 kg
Enclosure & Features:
• Sound-attenuated or open canopies available
• Heavy-duty steel base with forklift and lifting points
• Single-side service access
• 10% overload capability for 1 hour in 12 hours (prime mode)
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Fully maintained under Dayim’s preventive maintenance schedule
Inspected, tested, and certified prior to dispatch
Supported with 24/7 technical, logistics, and field service teams
Offered under short-term, long-term, or project-based rental contracts
Applications
Construction and infrastructure power supply
Industrial facilities and plant backup
Events, stadiums, and large temporary installations
Remote or off-grid installations
Generator paralleling for scalable load support
Product Summary
200kVA JCB G220QS Diesel Generator
Description
The JCB G220QS is a robust diesel generator built for heavy-duty industrial, rental, and backup power applications. It features a sound-insulated canopy, modular design, and comes equipped with advanced control systems and mobility features, delivering dependable, efficient power across demanding job sites.
Key Specifications
Prime Power (PRP): 200 kVA (160 kW)
Standby Power (ESP): 220 kVA (176 kW)
Voltage / Phase: 400/230 V, 3-phase (other voltage options for 60 Hz)
Engine: JCB 672 TA2G-170, turbocharged diesel, 6 cylinders
Fuel Tank Capacity: 360 L
Fuel Consumption (100 % Load, Prime): ~ 43.6 L/h
Weight (Canopy): 2,700 kg
Dimensions (Canopy): 3,800 × 1,140 × 2,075 mm
Alternator: Brushless, self-regulating AVR
Cooling: Water-cooled radiator system
Control Panel: Deep Sea electronics (DSE 4520 / 4510)
Enclosure Features:
• Lockable access doors
• Fork pockets & central lift point
• Bunded base for spill containment
• Large service access panels
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Maintained under Dayim’s preventive maintenance program
Inspected, tested, and certified prior to dispatch
Fully supported by Dayim’s 24/7 technical, logistics, and service teams
Offered on short-term, long-term, or project-based rental contracts
Applications
Construction and infrastructure sites
Industrial and process plant backups
Large-scale events, concerts, temporary facilities
Remote or off-grid installations
Parallel generator configurations for scalable load support
Product Summary
20m Genie Z-60/34 Articulating Boom Lift
Description
The Genie Z-60/34 is a diesel-powered articulating boom lift built for reliable performance in demanding environments. With its impressive up-and-over reach, exceptional terrain capability, and smooth proportional controls, it provides safe and efficient access for construction, maintenance, and industrial projects.
Key Specifications
Working Height: 20.39 m (66 ft 4 in)
Platform Height: 18.39 m (60 ft 4 in)
Horizontal Reach: 11.05 m (36 ft 3 in)
Up-and-Over Clearance: 8.23 m (27 ft)
Platform Capacity: 227 kg (500 lbs)
Platform Size: 0.91 m × 2.44 m (3 ft × 8 ft)
Jib Articulation: 90° vertical movement
Turntable Rotation: 360° continuous
Platform Rotation: 180° hydraulic
Drive Speed (stowed): 4.8 km/h (3.0 mph)
Drive Speed (raised): 1.1 km/h (0.68 mph)
Gradeability: 40 % (4WD mode)
Tail Swing: None (zero tail swing design)
Machine Weight: 10,215 kg (22,520 lbs)
Power Source: Diesel engine – Deutz D2011 L03 2.9 L (46 kW / 62 hp)
Fuel Tank Capacity: 75 L (20 gal)
Hydraulic Tank Capacity: 170 L (45 gal)
Stowed Dimensions:
• Length: 8.15 m (26 ft 9 in)
• Width: 2.46 m (8 ft 1 in)
• Height: 2.69 m (8 ft 10 in)
Availability & Readiness
Units available for immediate rental across Saudi Arabia and the GCC
Fully serviced and maintained under Dayim’s preventive maintenance program
Inspected, certified, and compliant with all safety and operational standards
Each machine undergoes comprehensive functionality checks before hire
Supported by Dayim’s 24/7 service, logistics, and technical assistance teams
Available for short-term, long-term, and project-based rental contracts
Applications
Construction and infrastructure projects
Industrial maintenance and plant operations
Oil & Gas, power generation, and refinery sites
Telecommunications and utility worksites
Bridge, overpass, and structural access
Event staging, façade, and signage installations
Let’s a have a look at Our Portfolio
Showcasing Our Digital Masterpieces